Magnetic Wire Pulling System KLEIN TOOLS SRS56037

Product Information

Once you’ve removed the excess glue, it’s time to reapply glue and start again. 3.4. After treatment

Maximum energy product, remanence and coercivity can all only be measured with a hysteresis graph testing machine which plots a second quadrant hysteresis curve. . When we consider the ‘strength’ of a magnet, there are several measurements that all contribute to a magnet’s strength in different ways, which can often seem confusing. It also depends on what is meant by strength; pulling force and magnetic field strength are often both summarised as strength. The deeper the texture, the stronger it bonds with the glue, so use deeper textured tabs for deep dents. As you pull the dent out, change the tabs to one with a shallower texture. Now, you should take care of the surface of your car. You can get a bit of a car paint polish and a soft cloth to buff out the area. After that, apply a bit of car wax or car paint sealant to make sure your paint is protected and conditioned. So, when selecting a magnet, the key things to look out for are the maximum energy product value of a magnet, the open circuit or surface gauss value and the maximum pull strength. These three attributes allow you to compare one magnet against another.Even though having a dent on the body of your vehicle seems like a big problem, you can fix most small dents and dings at home with one of the many dent puller kits. Pulling a dent is easier than you may think. Let’s go through the whole ordeal, step by step. 1. Surface Preparation As neodymium magnets have become more widely used, most manufacturers and suppliers provide a pull strength for each of their magnets to show how much weight a magnet can hold. Since these devices can be found for rather low prices, especially compared to the prices of professional service, getting a dent puller is not a big investment. However, you still want to get the best deal for your money. Because of that, you should know exactly what you need, what you don’t want, and what to look for when getting a dent puller. Let’s go through what makes a dent puller stand out from the rest. 1. Dent Size

When attaching the suction cup, you need to make sure that it covers the area of the dent completely. Push the suction cup in until you feel it grasped the surface firmly. After your car is overall clean, you should get a bit of rubbing alcohol on a soft cloth such as a microfiber cloth or a cotton pad. Clean the area immediately around and in the dent itself. Make sure that there is no grease or residue on the area you’ll be working on. 2. Pulling with a Suction Cup

Scrabble Tools

On the other hand, glue pullers are an efficient treatment for any small ding or dent, regardless of the depth of the cavity. They help you get a great grip, but they’re not as efficient in large areas since they have limited extraction width. The distance between the “legs” of the puller is very important in this case. It will only pull the area between the legs, which should be placed on a level area of the car bodywork. 2. Seal Quality It’s time to pull. Tug on the suction cup many times, rather than doing a single, strong pull. Tugs will help get the dent out little by little. Once your suction cup pops off, reattach it and continue to pull the dent if it’s not already out. 3. Glue Based Dent Pulling If you use the dent pullers in accordance with the user manual, there’s hardly any chance you’ll damage the vehicle. If you are much stronger than an average person, pay attention not to put all your might into pulling, since you may pull too hard and create a bulge. The only thing we’d recommend, especially if you’re working with a glue-based dent puller, is to have a bit of car paint polish to fix any scratches that may appear after scraping away the glue. After polishing, always apply top-rated car paint sealants, and afterward, a top-rated car wax. Remanence, measured in Gauss, is described as the magnetism that is left in a magnet, after the removal of the external magnetic force applied to magnetise it. When a material has been magnetised, it has remanence, as the magnetism has at some point been induced by an external magnetic field. COERCIVITY You take matters into your own hands and fix the dent for a fraction of the price it takes to do it at a shop.

It’s time to use the construction of the puller to pull the dent. Typically, glue-based dent pullers have some sort of legs that should be placed on the surface of the car. Place them firmly, so they don’t bob, and start pulling according to the instructions on your puller. magnetic force, attraction or repulsion that arises between electrically charged particles because of their motion. It is the basic force responsible for such effects as the action of electric motors and the attraction of magnets for iron. Electric forces exist among stationary electric charges; both electric and magnetic forces exist among moving electric charges. The magnetic force between two moving charges may be described as the effect exerted upon either charge by a magnetic field created by the other. Maximum energy product, also referred to as BHmax is calculated by multiplying a magnet’s remanence (Br) and coercivity (Hc). REMANENCEOnce you’re happy with how the dent looks, it’s time to remove the glue one last time. If you can’t remove everything with a scraper, use a bit of rubbing alcohol to treat the glue. Soak it in, let it cure for a little while, and then have another go at it with the scraper. Once your glue is applied, place the puller tab on the center of the dent. Leave it for a couple of minutes to cure. You’ll know the glue is ready when it cools down and hardens. Alternatively, glue dent pullers need to have a range of high-quality tabs. The tabs are generally made of plastic, and they need to be able to withstand the force of the pull without snapping. The tabs with deep textures are the best since the texture allows the glue to bond with the tab well. 3. The Handle These innovative tools simplify the task, using a powerful magnet to guide wires through walls, ceilings, and confined areas. A magnetic wire puller is a tool used to route wires through walls, ceilings, or confined spaces. It uses a magnet to guide and pull wires, making the installation process easier and less time-consuming, especially in tight or hard-to-reach areas.